澳门游戏网站

首页

公司新闻

可以将木屑颗粒机燃烧的分为四个阶段

来源:admin 发布时间:2016-08-24 18:02 浏览次数:
使用木屑颗粒剂的好处,好多客户都不明白,今天我们就说说。
The benefits of using wood chips granules, a lot of customers don't understand, we will talk about today.
木屑颗粒机之所以能在使用的时候,能达到很好的效果,是因为它的内部有着很多个系统相配合的原因,那么对于木屑颗粒机来说,它内部有着自己的喂料系统,对于它在这方面的系统来说,它自己对于自己也是有着一定的要求的,首先是它要达到自己在喂料方便的表现。
Sawdust pellet machine can use, can achieve very good effect, because it has a number of internal coordinates system, then for sawdust particles machine, it has its own internal feeding system, for it in this system, it for themselves also have certain requirements, first of all is it convenient to their feed.
很多人都知道木屑颗粒机在常温条件下利用各种原料进行挤压而制成的。原料的密度一般为 140kg/m左右,成型后的颗粒密度大于1200kg/m ,木屑颗粒中含有纤维素、半纤维素、木质素等。由于结构比较疏松,密度小,当受到外力后,原料将经历重新排列位置、弹性变形、机械变形、塑性变形阶段。
Many people know that the wood pellet machine at room temperature under the conditions of using various raw materials made by extruding. Raw material of the density of 140 kg/m or so commonly, after forming the grain density of more than 1200 kg/m, sawdust particles containing cellulose, hemicellulose, and lignin, etc. Because structure is loose, density is small, after the impact, the raw material will rearrange the location, the elastic deformation, mechanical deformation and plastic deformation stage.
可以将木屑颗粒机燃烧的分为四个阶段。
Burning of wood particles machine can be divided into four stages.
第一阶段是将生物质原料的脱水过程,失重在10%
The first stage is the dehydration process of biomass, weightlessness in 10%
第二阶段这一阶段是生物质挥发分和碳的燃烧过程,挥发分和碳的燃烧分别集中在450℃和495℃。失重应该控制在85%
The second stage of this phase is biomass combustion of volatile matter and carbon, combustion of volatile matter and carbon concentration at 450 ℃ and 495 ℃ respectively. Weight loss should be controlled in 85%
第三阶段这一阶段是无机物的晶体转变过程。同一化学组成的物质有事具有不同的晶型,一定范围内自由焓量低的晶体最稳定。质量不变。
The third phase of this phase is inorganic crystal transformation process. Material of the same chemical composition is occupied with different crystal type, low enthalpy amount within a certain range of crystal is the most stable. The same quality.
第四阶段是木屑颗粒机的成形阶段。
The fourth stage is the forming stage of the sawdust pellet machine.
我们公司的产品能将木屑颗粒机成料率达到90%以上,可能您估计不太会相信,但我们欢迎广大客户来我厂视察检验!!
Our company's products can be sawdust particles machine ChengLiao rate above 90%, can you estimate is unlikely to believe that, but we welcome all customers to visit our factory inspection!!

上一篇:澳门游戏网站燃料成型原理

下一篇:如何判断木屑颗粒机模具的质量

相关产品

更多>>
?